Aerial Cable / Messenger with Hook

Aerial Cable / Messenger with Hook are a kind of clamps used for pole line system. The dimensions, features, application, materials, and other details about this type clamp are shown in the following.

Aerial Cable / Messenger with Hook   Aerial Cable / Messenger with Hook

Aerial Cable / Messenger with Hook dimensions:
The PA292X is used on .109 inch to .134 inch bare or insulated messenger wire. The hook serves as a safety device and can be used in the stringing of the cable. The clamp sections and hook accommodate a 5/8-inch diameter pole mounting bolt. The clamp surface length is 1-3/4-inches.
These clamps are used for tangent construction or angles to 10 degrees. The hook is provided for stringing and safety.
The PA296X is used for heavier construction.

Aerial Cable / Messenger with Hook Features:
These clamps are used for tangent construction or angles to 10 degrees. Clamps accomodate 1/4" insulated messenger. The hook is provided for stringing and safety. The J2235 designed for normal use. The J2245 is supplied with two clamp bolts for maximum holding strength in areas of advese wind conditions or where long spans and heavier loads are required. Independent clamping - remains tight if pole shrinkage occurs.

Aerial Cable / Messenger with Hook Application:
A 5/8" bolt is mounted on pole with hook against pole. The square nut is tightened up against the hook and left in a square position as shown. Add a minimum of 3" to pole diameter to determine length of bolt to be used. After the cable is stung, the nut is loosened, and the keeper is turned around as shown. The cable is then raised up so that the messenger can be gripped tightly in the groove of the hanger by tightening the nut.

Aerial Cable / Messenger with Hook Material: Ductile Iron - Hot Dip Galvanized


Relative Articles:
Explosive overlap joint Splicing Sleeve for Steel Wire
Grading and Shielding Ring
S-Parallel Groove Clamp
Parallel type, horn holder type ball eye
U-bolt, U-bolt enhanced
PV Power Plant

©2014 Zhengzhou Orient Powe Co., Ltd All rights reserved.  sales@orientinsulators.com
Orient Group is a professional manufacturer and exporter of composite suspension insulator and porcelain disc suspension insulator.