+86-371-86097078
HV Pole Clamps, LV Pole Clamps, Suspension Clamps, Tension Clamp (Compression Type), and other clamps are the common clamps used for transformation and distribution line applications.
HV Pole Clamps, LV Pole Clamps data:
Description: Pole clamp, M.S. hot dip
Material: Mild steel
Galavanised to BS 729
Flat Size: 75mm 8mm c/w M16 150mm bolt, nut, washer, & split pin
LV Pole Clamps Bracket, 33 kV Pole Clamp Bracket data:
Description: Pole clamp, M.S. hot dip
Material: Mild steel
Galavanised to BS 729
Flat Size: 38mm 5mm
Suspension Clamps details:
Highly articulating type clamps with movements in all directions.
|
UTS
|
|
7000 kgs
|
|
Made of : Aluminium Alloy and Forged Steel
Conductor Range : 7.0 mm to 18.0 mm A = 146 B = 125 C = 24 D = 16mm |
|
UTS
|
|
7000 kgs
|
|
Conductor Range : 7-18 A = 146 B = 145 C = 24 D = 16
Conductor Range : 19-29 A = 190 B = 145 C = 25 D = 16 |
Suspension Clamps Envelop Type:
Type 1: Envelope type, lowest power losses design, slips strength upto 25% to 30% of rated conductor strength
|
UTS
|
|
|
4500 kgs
|
7000 kgs
|
|
Aluminium alloy die cast
Conductor Range : Min.3.0 mm - Max. 15.0 and 7.6 mm to 18.0 mm |
|
|
A=146
B=545 C=19 D=16 |
A=181
B=57 C=22 D=16 |
Suspension Clamps Trunnion Type:
Type 2: Bottom bolted free centre type, slip strength upto 25% to 30% of rated conductor strength
|
UTS
|
|
7000 kgs
|
|
A = 146 B = 75 C = 24 D = 16
Conductor Range : 7.0 to 18.0 mm |
Tension Clamp (Compression Type):
|
Conductor /
E / Wire |
OD
|
ID
|
FF
|
CC
|
od
|
id
|
ff
|
c
|
|
BATANG
|
43.0
|
26.0
|
36.0
|
41.0
|
12.2
|
6.2
|
10.1
|
11.7
|
|
SKUNK
|
30.0
|
16.2
|
25.0
|
29.4
|
15.2
|
8.0
|
12.7
|
14.7
|
Tension Clamp (Compression Type) Technical Data:
Minm. failing load (without tension clamp)
Slip strength of tension clamp:
90% of U.T.S. of earth wire
SPCN to which fittings conform => IS: 2121, PART-III
Minm. Failing load: 95% of U.T.S. of E/Wire
1) Spcn. to which galvanising conforms=> IS: 2633
2) SPCN to which electro-galvanising conform=>IS: 1573
General tolerance 3%
U Clamp 5/8" Material:
Forged steel / cast iron
Bolt & Nut: HDG Steel
Finish: Hot Dip galvanised to BS 729
Relative Articles:
◆Suspension insulator hardware
◆Silicone rubber suspension insulator,silicone rubber suspension insulator hardware
◆End fitting types of Composite suspension insulators
◆Composite deadend insulator end fittings
Orient Group is a professional manufacturer and exporter of composite suspension insulator and porcelain disc suspension insulator.