Corona Control Rings

Corona Control Rings are deployed in EHV/ UHV level for dual purpose of reducing electrical stresses to ensure extinction of corona below a certain voltage level thereby reducing losses due to corona.

Corona Control Rings

Corona Control Rings applications:
Corona Control Rings are deployed in EHV/ UHV level for dual purpose of reducing electrical stresses to ensure extinction of corona below a certain voltage level thereby reducing losses due to corona as well as taking care of voltage grading along insulator string. The design of CC ring also ensures Radio Interference Voltage (RIV) under the acceptable limit. Surface Voltage Gradient on surface of conductor is calculated for Transmission Lines and Sub-stations and is kept within safe limit with respect to corona inception.

Design of CC Ring for 1200kV Transmission Line and Sub-Station Hardware – A technical Landmark Achieved by ORIENT

Corona Control (CC) Rings are deployed in EHV/ UHV level for dual purpose of reducing electrical stresses to ensure extinction of corona below a certain voltage level thereby reducing losses due to corona as well as taking care of voltage grading along insulator string. The design of CC ring also ensures Radio Interference Voltage (RIV) under the acceptable limit. Surface Voltage Gradient on surface of conductor are calculated for Transmission Lines and Sub-stations and are kept within safe limit with respect to corona inception. 1200kV system needs special attention on the design aspect of CC Rings in view of the large dimension of the CC Ring to cover a large Hardware Fitting set. Surface Voltage Gradient on surface of conductor was calculated for Transmission Lines and Sub-stations and found within safe limit with respect to corona inception. Selection of CC ring has been done by covering a much larger diameter and effective surface area and hence performance with respect to Corona Inception and Losses will be within limit. To achieve this, 100mm diameter 6063 Grade Aluminum Alloy extruded tube with 5mm thickness was selected. Bending of such tubes called for new and higher capacity bending machines along with new dies which were developed in-house. CC ring for Tension Hardware is of so big dimension, it was fabricated (bend) in two halves. Two numbers of Couplings having inner diameter near to tube outer diameter have been deployed at the two adjoining points of the two halves of CC ring. To facilitate smooth fitment, the couplings are tapered inside from center to outermost point on either side. Opening up of CC ring has been arrested by two structural steel flats bolted with the bracket of CC ring and fastening both the halves of CC ring together. Studies were conducted by M/s Decan Enterprises to determine voltage distribution along insulator string. Polymer Insulator with Octagonal bundle conductor were considered with two types of outer Corona Control/ Grading rings viz., 700mm and 1100mm ring diameters.


Relative Articles:
Victor polymer insulator development
Polymer insulator production details
Maintenance Equipment
Development of Electricity
Double Tension String Assembly for ACSR Twin Moose with Turn Buckle
Double Suspension String Assembly

©2014 Zhengzhou Orient Powe Co., Ltd All rights reserved.  sales@orientinsulators.com
Orient Group is a professional manufacturer and exporter of composite suspension insulator and porcelain disc suspension insulator.