SICON is the First Cable Connector with Stepless Shear Bolts, and the following is the problem, solution, technical features, Advantages, and other details of the First Cable Connector with Stepless Shear Bolts.

Bolted technology with a difference!
The problem of SICON the First Cable Connector with Stepless Shear Bolts:
The design strength of the multi-stage shear bolt – the integral predetermined breaking points – is at the same time its decisive weakness. Each breaking point interrupts the load-carrying thread, and the maximum clamping force cannot be achieved. A further disadvantage is that the stages must be matched very accurately to the installed cable conductors – otherwise the bolt will break either too high or too low.

The solution of SICON the First Cable Connector with Stepless Shear Bolts:
The special design feature of these bolts is that there are no predetermined break points in the thread. This ensures optimum thread loading for every cross section range. The bolt always breaks at the surface of the clamp body.

SICON the First Cable Connector with Stepless Shear Bolts Technical features:
Large clamping ranges:
10 – 95 mm²; 25 – 150 mm²;
50 – 240 mm²; 95 – 300 mm²;
300 – 630 mm²
Compact design: Rounded edges and flat transitions suitable for slide-on and shrink sleeves.
Special variants for high voltage, e. g. in conjunction with ORIENT IXOSIL cable terminations with clamping ranges up to 2500 mm²

SICON the First Cable Connector with Stepless Shear Bolts Advantages:
No special tools required
Clean and soft shearing of the shear bolt makes tightening easier
Everything flush! Nothing left projecting and nothing has to be filed down
High contact force

Relative Articles:
◆Insulator historical development
◆Electrical insulators
◆Porcelain pin insulator
◆Suspension insulator test